◎ Direct access to each pallet
◎ Good for low volume or high differentiation product lines
◎ Use standard forklifts for access
◎ Front-loaded racking
◎ Adaptable to any product volume, weight or size
◎ Cost savings through wide span beams with piston lock connectors
LIJIN Pallet racks allow you to use every available inch of space in your warehouse. They make it possible for you to store goods higher than at just floor level within your building. The adjustable rack system can increase productivity and service quality by:
◎ Optimize Your Storage Capacity In Your Storage Facility – To upgrade and increase the storage capacity in warehouses and stores, pallet racks are ideal. These racks occupy minimum installation floor space and offer extra space to store goods.
◎ Low-Cost Effective Racking System – If you are looking for a perfect racking system at less price, then here it is. It requires minimum expenditure to install a pallet racking system. It saves up on the overall cost of racking systems installation.
◎ Easy To Assemble And Dismantle – Assembling and dismantling pallet racks is simple and can be done whenever it is necessary.
◎ Ensures Safety To The Stored Products – Equipping your storage facility with a pallet racking system is a good idea if the safety of your products is paramount. Pallet Rack guarantees that the shelved inventories are safe and prevent damage from accidents.
Compared to other types of racking, selective pallet racking has a lower storage capacity; however, it is also the most economical type of racking per square meter – unless you are storing high volumes of inventory (3000 pallets or more) then it could well be the most expensive solution.
Pallet racks are used for storing the following products:
1. Warehouse Design layouts & 3D drawings
2. Rack Installation instruction
3. Quality assurancet & Best price
4. Cooperation with us can reduce a lot of time and achieve a win-win goal
1. Erect the uprights
2. Insert the rear beams
3. Insert the front beams
4. Measure the square
Erect the uprights: Using the chalk line as your guide, stand one upright on the outer edge and hold it in place. With the help of an assistant, erect the second across from the first. Use a level to check that the uprights are vertical. If they aren’t, place shims underneath the uprights until they are straight. Typically, a slight tilt of no more than 1/8 inch is okay, but check the installation guide for specific instructions from your manufacturer. Anchor the uprights to the floor using the recommended method in your installation guide.
Insert the rear beams: Insert the bottom rear beam first. With the help of your assistant, place the bottom rear beam in the correct slots between the two uprights, and use a mallet to secure it in place gently. If your beams do not use a slotting system, you may need to bolt them to the frame. Repeat this process with the top rear beam. Depending on the height of your uprights and racking system, you might need to use a lifting device to attach the beams and uprights.
Insert the front beams: Once you have installed and secured the two rear beams, it’s time to install the front beams. Start with the top front beam, placing it at the exact level as the top beam at the rear. Secure it like you did the rear beam, then move on to the fourth and final beam installation. Once you have installed all four beams, you have formed your first bay.
Measure the square: Before you move on to the remaining bays, use a tape measure to check that the first bay measures as a square and that all spacing is correct and equal. This is an important step, as it will save you a headache later on when installing your shelving. We will provide installation video and drawings.
Another option for assembling industrial shelving is to let a professional installer help you with your project. lijinrack is ready to respond to your needs.
There are several reasons why this may be a good option for you.
You may lack the time, supplies or available assistance to take on pallet racking assembly on your own.
Or perhaps your pallet racking design may be complex or massive and require a team of professionals to complete the racking installation to perfection.
Describe the project in detail to help us support the project and deliver faster and better.
We will reply within 24 hours.